High Temperature PLA (HTPLA) 3D Printing Filament - 1kg
Home > 3-D Printing > PLA 3D Filament
 |
** Please note this is a pre-sell item that will ship mid to late June 2014 - there will be a VERY limited run of this filament so pre-order will receive priority and will be guaranteed to receive the first batch! *** Proto-Pasta High Temperature PLA is made from a custom compound consisting of mineral filled impact modified PLA with a nucleating agent to help promote crystallization. Crystallization after printing is what gives this material added heat resistance. To fully realize this advantage, parts must be soaked in hot water or an oven after printing at 60C-80C for 3-5 minutes. This crystallizes the material and makes it much more heat resistant. It does not require a heated bed to print well, but this may help crystallize the material after printing and make oven soaking unnecessary for some parts. High Temperature PLA is a glossy off white, or very light gray. Printed parts look good and have slightly more texture than standard PLA. This material is not translucent like standard PLA. We have had good results printing at 190C-210C using a .5mm nozzle and direct-drive spring loaded pinch-roll style extrusion head. Layer adhesion is good and the material has low warpage. Only $99.95 - Click here to buy now! |
